<?php
require('fpdf.php');

class PDF_MY_Table extends FPDF
{
var $widths;
var $aligns;
var $angle=0;
var $extgstates;
    // Sets line style
    // Parameters:
    // - style: Line style. Array with keys among the following:
    //   . width: Width of the line in user units
    //   . cap: Type of cap to put on the line (butt, round, square). The difference between 'square' and 'butt' is that 'square' projects a flat end past the end of the line.
    //   . join: miter, round or bevel
    //   . dash: Dash pattern. Is 0 (without dash) or array with series of length values, which are the lengths of the on and off dashes.
    //           For example: (2) represents 2 on, 2 off, 2 on , 2 off ...
    //                        (2,1) is 2 on, 1 off, 2 on, 1 off.. etc
    //   . phase: Modifier of the dash pattern which is used to shift the point at which the pattern starts
    //   . color: Draw color. Array with components (red, green, blue)
    function SetLineStyle($style) {
        extract($style);
        if (isset($width)) {
            $width_prev = $this->LineWidth;
            $this->SetLineWidth($width);
            $this->LineWidth = $width_prev;
        }
        if (isset($cap)) {
            $ca = array('butt' => 0, 'round'=> 1, 'square' => 2);
            if (isset($ca[$cap]))
                $this->_out($ca[$cap] . ' J');
        }
        if (isset($join)) {
            $ja = array('miter' => 0, 'round' => 1, 'bevel' => 2);
            if (isset($ja[$join]))
                $this->_out($ja[$join] . ' j');
        }
        if (isset($dash)) {
            $dash_string = '';
            if ($dash) {
                if(ereg('^.+,', $dash))
                    $tab = explode(',', $dash);
                else
                    $tab = array($dash);
                $dash_string = '';
                foreach ($tab as $i => $v) {
                    if ($i > 0)
                        $dash_string .= ' ';
                    $dash_string .= sprintf('%.2f', $v);
                }
            }
            if (!isset($phase) || !$dash)
                $phase = 0;
            $this->_out(sprintf('[%s] %.2f d', $dash_string, $phase));
        }
        if (isset($color)) {
            list($r, $g, $b) = $color;
            $this->SetDrawColor($r, $g, $b);
        }
    }

    // Draws a line
    // Parameters:
    // - x1, y1: Start point
    // - x2, y2: End point
    // - style: Line style. Array like for SetLineStyle
    function Line($x1, $y1, $x2, $y2, $style = null) {
        if ($style)
            $this->SetLineStyle($style);
        parent::Line($x1, $y1, $x2, $y2);
    }

    // Draws a rectangle
    // Parameters:
    // - x, y: Top left corner
    // - w, h: Width and height
    // - style: Style of rectangle (draw and/or fill: D, F, DF, FD)
    // - border_style: Border style of rectangle. Array with some of this index
    //   . all: Line style of all borders. Array like for SetLineStyle
    //   . L: Line style of left border. null (no border) or array like for SetLineStyle
    //   . T: Line style of top border. null (no border) or array like for SetLineStyle
    //   . R: Line style of right border. null (no border) or array like for SetLineStyle
    //   . B: Line style of bottom border. null (no border) or array like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    function Rect($x, $y, $w, $h, $style = '', $border_style = null, $fill_color = null) {
        if (!(false === strpos($style, 'F')) && $fill_color) {
            list($r, $g, $b) = $fill_color;
            $this->SetFillColor($r, $g, $b);
        }
        switch ($style) {
            case 'F':
                $border_style = null;
                parent::Rect($x, $y, $w, $h, $style);
                break;
            case 'DF': case 'FD':
                if (!$border_style || isset($border_style['all'])) {
                    if (isset($border_style['all'])) {
                        $this->SetLineStyle($border_style['all']);
                        $border_style = null;
                    }
                } else
                    $style = 'F';
                parent::Rect($x, $y, $w, $h, $style);
                break;
            default:
                if (!$border_style || isset($border_style['all'])) {
                    if (isset($border_style['all']) && $border_style['all']) {
                        $this->SetLineStyle($border_style['all']);
                        $border_style = null;
                    }
                    parent::Rect($x, $y, $w, $h, $style);
                }
                break;
        }
        if ($border_style) {
            if (isset($border_style['L']) && $border_style['L'])
                $this->Line($x, $y, $x, $y + $h, $border_style['L']);
            if (isset($border_style['T']) && $border_style['T'])
                $this->Line($x, $y, $x + $w, $y, $border_style['T']);
            if (isset($border_style['R']) && $border_style['R'])
                $this->Line($x + $w, $y, $x + $w, $y + $h, $border_style['R']);
            if (isset($border_style['B']) && $border_style['B'])
                $this->Line($x, $y + $h, $x + $w, $y + $h, $border_style['B']);
        }
    }

    // Draws a Bézier curve (the Bézier curve is tangent to the line between the control points at either end of the curve)
    // Parameters:
    // - x0, y0: Start point
    // - x1, y1: Control point 1
    // - x2, y2: Control point 2
    // - x3, y3: End point
    // - style: Style of rectangule (draw and/or fill: D, F, DF, FD)
    // - line_style: Line style for curve. Array like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    function Curve($x0, $y0, $x1, $y1, $x2, $y2, $x3, $y3, $style = '', $line_style = null, $fill_color = null) {
        if (!(false === strpos($style, 'F')) && $fill_color) {
            list($r, $g, $b) = $fill_color;
            $this->SetFillColor($r, $g, $b);
        }
        switch ($style) {
            case 'F':
                $op = 'f';
                $line_style = null;
                break;
            case 'FD': case 'DF':
                $op = 'B';
                break;
            default:
                $op = 'S';
                break;
        }
        if ($line_style)
            $this->SetLineStyle($line_style);

        $this->_Point($x0, $y0);
        $this->_Curve($x1, $y1, $x2, $y2, $x3, $y3);
        $this->_out($op);
    }

    // Draws an ellipse
    // Parameters:
    // - x0, y0: Center point
    // - rx, ry: Horizontal and vertical radius (if ry = 0, draws a circle)
    // - angle: Orientation angle (anti-clockwise)
    // - astart: Start angle
    // - afinish: Finish angle
    // - style: Style of ellipse (draw and/or fill: D, F, DF, FD, C (D + close))
    // - line_style: Line style for ellipse. Array like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    // - nSeg: Ellipse is made up of nSeg Bézier curves
    function Ellipse($x0, $y0, $rx, $ry = 0, $angle = 0, $astart = 0, $afinish = 360, $style = '', $line_style = null, $fill_color = null, $nSeg = 8) {
        if ($rx) {
            if (!(false === strpos($style, 'F')) && $fill_color) {
                list($r, $g, $b) = $fill_color;
                $this->SetFillColor($r, $g, $b);
            }
            switch ($style) {
                case 'F':
                    $op = 'f';
                    $line_style = null;
                    break;
                case 'FD': case 'DF':
                    $op = 'B';
                    break;
                case 'C':
                    $op = 's'; // small 's' means closing the path as well
                    break;
                default:
                    $op = 'S';
                    break;
            }
            if ($line_style)
                $this->SetLineStyle($line_style);
            if (!$ry)
                $ry = $rx;
            $rx *= $this->k;
            $ry *= $this->k;
            if ($nSeg < 2)
                $nSeg = 2;

            $astart = deg2rad((float) $astart);
            $afinish = deg2rad((float) $afinish);
            $totalAngle = $afinish - $astart;

            $dt = $totalAngle/$nSeg;
            $dtm = $dt/3;

            $x0 *= $this->k;
            $y0 = ($this->h - $y0) * $this->k;
            if ($angle != 0) {
                $a = -deg2rad((float) $angle);
                $this->_out(sprintf('q %.2f %.2f %.2f %.2f %.2f %.2f cm', cos($a), -1 * sin($a), sin($a), cos($a), $x0, $y0));
                $x0 = 0;
                $y0 = 0;
            }

            $t1 = $astart;
            $a0 = $x0 + ($rx * cos($t1));
            $b0 = $y0 + ($ry * sin($t1));
            $c0 = -$rx * sin($t1);
            $d0 = $ry * cos($t1);
            $this->_Point($a0 / $this->k, $this->h - ($b0 / $this->k));
            for ($i = 1; $i <= $nSeg; $i++) {
                // Draw this bit of the total curve
                $t1 = ($i * $dt) + $astart;
                $a1 = $x0 + ($rx * cos($t1));
                $b1 = $y0 + ($ry * sin($t1));
                $c1 = -$rx * sin($t1);
                $d1 = $ry * cos($t1);
                $this->_Curve(($a0 + ($c0 * $dtm)) / $this->k,
                            $this->h - (($b0 + ($d0 * $dtm)) / $this->k),
                            ($a1 - ($c1 * $dtm)) / $this->k,
                            $this->h - (($b1 - ($d1 * $dtm)) / $this->k),
                            $a1 / $this->k,
                            $this->h - ($b1 / $this->k));
                $a0 = $a1;
                $b0 = $b1;
                $c0 = $c1;
                $d0 = $d1;
            }
            $this->_out($op);
            if ($angle !=0)
                $this->_out('Q');
        }
    }

    // Draws a circle
    // Parameters:
    // - x0, y0: Center point
    // - r: Radius
    // - astart: Start angle
    // - afinish: Finish angle
    // - style: Style of circle (draw and/or fill) (D, F, DF, FD, C (D + close))
    // - line_style: Line style for circle. Array like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    // - nSeg: Ellipse is made up of nSeg Bézier curves
    function Circle($x0, $y0, $r, $astart = 0, $afinish = 360, $style = '', $line_style = null, $fill_color = null, $nSeg = 8) {
        $this->Ellipse($x0, $y0, $r, 0, 0, $astart, $afinish, $style, $line_style, $fill_color, $nSeg);
    }

    // Draws a polygon
    // Parameters:
    // - p: Points. Array with values x0, y0, x1, y1,..., x(np-1), y(np - 1)
    // - style: Style of polygon (draw and/or fill) (D, F, DF, FD)
    // - line_style: Line style. Array with one of this index
    //   . all: Line style of all lines. Array like for SetLineStyle
    //   . 0..np-1: Line style of each line. Item is 0 (not line) or like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    function Polygon($p, $style = '', $line_style = null, $fill_color = null) {
        $np = count($p) / 2;
        if (!(false === strpos($style, 'F')) && $fill_color) {
            list($r, $g, $b) = $fill_color;
            $this->SetFillColor($r, $g, $b);
        }
        switch ($style) {
            case 'F':
                $line_style = null;
                $op = 'f';
                break;
            case 'FD': case 'DF':
                $op = 'B';
                break;
            default:
                $op = 'S';
                break;
        }
        $draw = true;
        if ($line_style)
            if (isset($line_style['all']))
                $this->SetLineStyle($line_style['all']);
            else { // 0 .. (np - 1), op = {B, S}
                $draw = false;
                if ('B' == $op) {
                    $op = 'f';
                    $this->_Point($p[0], $p[1]);
                    for ($i = 2; $i < ($np * 2); $i = $i + 2)
                        $this->_Line($p[$i], $p[$i + 1]);
                    $this->_Line($p[0], $p[1]);
                    $this->_out($op);
                }
                $p[$np * 2] = $p[0];
                $p[($np * 2) + 1] = $p[1];
                for ($i = 0; $i < $np; $i++)
                    if (!empty($line_style[$i]))
                        $this->Line($p[$i * 2], $p[($i * 2) + 1], $p[($i * 2) + 2], $p[($i * 2) + 3], $line_style[$i]);
            }

        if ($draw) {
            $this->_Point($p[0], $p[1]);
            for ($i = 2; $i < ($np * 2); $i = $i + 2)
                $this->_Line($p[$i], $p[$i + 1]);
            $this->_Line($p[0], $p[1]);
            $this->_out($op);
        }
    }

    // Draws a regular polygon
    // Parameters:
    // - x0, y0: Center point
    // - r: Radius of circumscribed circle
    // - ns: Number of sides
    // - angle: Orientation angle (anti-clockwise)
    // - circle: Draw circumscribed circle or not
    // - style: Style of polygon (draw and/or fill) (D, F, DF, FD)
    // - line_style: Line style. Array with one of this index
    //   . all: Line style of all lines. Array like for SetLineStyle
    //   . 0..ns-1: Line style of each line. Item is 0 (not line) or like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    // - circle_style: Style of circumscribed circle (draw and/or fill) (D, F, DF, FD) (if draw)
    // - circle_line_style: Line style for circumscribed circle. Array like for SetLineStyle (if draw)
    // - circle_fill_color: Fill color for circumscribed circle. Array with components (red, green, blue) (if draw fill circle)
    function RegularPolygon($x0, $y0, $r, $ns, $angle = 0, $circle = false, $style = '', $line_style = null, $fill_color = null, $circle_style = '', $circle_line_style = null, $circle_fill_color = null) {
        if ($ns < 3)
            $ns = 3;
        if ($circle)
            $this->Circle($x0, $y0, $r, 0, 360, $circle_style, $circle_line_style, $circle_fill_color);
        $p = null;
        for ($i = 0; $i < $ns; $i++) {
            $a = $angle + ($i * 360 / $ns);
            $a_rad = deg2rad((float) $a);
            $p[] = $x0 + ($r * sin($a_rad));
            $p[] = $y0 + ($r * cos($a_rad));
        }
        $this->Polygon($p, $style, $line_style, $fill_color);
    }

    // Draws a star polygon
    // Parameters:
    // - x0, y0: Center point
    // - r: Radius of circumscribed circle
    // - nv: Number of vertices
    // - ng: Number of gaps (ng % nv = 1 => regular polygon)
    // - angle: Orientation angle (anti-clockwise)
    // - circle: Draw circumscribed circle or not
    // - style: Style of polygon (draw and/or fill) (D, F, DF, FD)
    // - line_style: Line style. Array with one of this index
    //   . all: Line style of all lines. Array like for SetLineStyle
    //   . 0..n-1: Line style of each line. Item is 0 (not line) or like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    // - circle_style: Style of circumscribed circle (draw and/or fill) (D, F, DF, FD) (if draw)
    // - circle_line_style: Line style for circumscribed circle. Array like for SetLineStyle (if draw)
    // - circle_fill_color: Fill color for circumscribed circle. Array with components (red, green, blue) (if draw fill circle)
    function StarPolygon($x0, $y0, $r, $nv, $ng, $angle = 0, $circle = false, $style = '', $line_style = null, $fill_color = null, $circle_style = '', $circle_line_style = null, $circle_fill_color = null) {
        if ($nv < 2)
            $nv = 2;
        if ($circle)
            $this->Circle($x0, $y0, $r, 0, 360, $circle_style, $circle_line_style, $circle_fill_color);
        $p2 = null;
        $visited = null;
        for ($i = 0; $i < $nv; $i++) {
            $a = $angle + ($i * 360 / $nv);
            $a_rad = deg2rad((float) $a);
            $p2[] = $x0 + ($r * sin($a_rad));
            $p2[] = $y0 + ($r * cos($a_rad));
            $visited[] = false;
        }
        $p = null;
        $i = 0;
        do {
            $p[] = $p2[$i * 2];
            $p[] = $p2[($i * 2) + 1];
            $visited[$i] = true;
            $i += $ng;
            $i %= $nv;
        } while (!$visited[$i]);
        $this->Polygon($p, $style, $line_style, $fill_color);
    }

    // Draws a rounded rectangle
    // Parameters:
    // - x, y: Top left corner
    // - w, h: Width and height
    // - r: Radius of the rounded corners
    // - round_corner: Draws rounded corner or not. String with a 0 (not rounded i-corner) or 1 (rounded i-corner) in i-position. Positions are, in order and begin to 0: top left, top right, bottom right and bottom left
    // - style: Style of rectangle (draw and/or fill) (D, F, DF, FD)
    // - border_style: Border style of rectangle. Array like for SetLineStyle
    // - fill_color: Fill color. Array with components (red, green, blue)
    function RoundedRect($x, $y, $w, $h, $r, $round_corner = '1111', $style = '', $border_style = null, $fill_color = null) {
        if ('0000' == $round_corner) // Not rounded
            $this->Rect($x, $y, $w, $h, $style, $border_style, $fill_color);
        else { // Rounded
            if (!(false === strpos($style, 'F')) && $fill_color) {
                list($red, $g, $b) = $fill_color;
                $this->SetFillColor($red, $g, $b);
            }
            switch ($style) {
                case 'F':
                    $border_style = null;
                    $op = 'f';
                    break;
                case 'FD': case 'DF':
                    $op = 'B';
                    break;
                default:
                    $op = 'S';
                    break;
            }
            if ($border_style)
                $this->SetLineStyle($border_style);

            $MyArc = 4 / 3 * (sqrt(2) - 1);

            $this->_Point($x + $r, $y);
            $xc = $x + $w - $r;
            $yc = $y + $r;
            $this->_Line($xc, $y);
            if ($round_corner[0])
                $this->_Curve($xc + ($r * $MyArc), $yc - $r, $xc + $r, $yc - ($r * $MyArc), $xc + $r, $yc);
            else
                $this->_Line($x + $w, $y);

            $xc = $x + $w - $r ;
            $yc = $y + $h - $r;
            $this->_Line($x + $w, $yc);

            if ($round_corner[1])
                $this->_Curve($xc + $r, $yc + ($r * $MyArc), $xc + ($r * $MyArc), $yc + $r, $xc, $yc + $r);
            else
                $this->_Line($x + $w, $y + $h);

            $xc = $x + $r;
            $yc = $y + $h - $r;
            $this->_Line($xc, $y + $h);
            if ($round_corner[2])
                $this->_Curve($xc - ($r * $MyArc), $yc + $r, $xc - $r, $yc + ($r * $MyArc), $xc - $r, $yc);
            else
                $this->_Line($x, $y + $h);

            $xc = $x + $r;
            $yc = $y + $r;
            $this->_Line($x, $yc);
            if ($round_corner[3])
                $this->_Curve($xc - $r, $yc - ($r * $MyArc), $xc - ($r * $MyArc), $yc - $r, $xc, $yc - $r);
            else {
                $this->_Line($x, $y);
                $this->_Line($x + $r, $y);
            }
            $this->_out($op);
        }
    }

    /* PRIVATE METHODS */

    // Sets a draw point
    // Parameters:
    // - x, y: Point
    function _Point($x, $y) {
        $this->_out(sprintf('%.2f %.2f m', $x * $this->k, ($this->h - $y) * $this->k));
    }

    // Draws a line from last draw point
    // Parameters:
    // - x, y: End point
    function _Line($x, $y) {
        $this->_out(sprintf('%.2f %.2f l', $x * $this->k, ($this->h - $y) * $this->k));
    }

    // Draws a Bézier curve from last draw point
    // Parameters:
    // - x1, y1: Control point 1
    // - x2, y2: Control point 2
    // - x3, y3: End point
    function _Curve($x1, $y1, $x2, $y2, $x3, $y3) {
        $this->_out(sprintf('%.2f %.2f %.2f %.2f %.2f %.2f c', $x1 * $this->k, ($this->h - $y1) * $this->k, $x2 * $this->k, ($this->h - $y2) * $this->k, $x3 * $this->k, ($this->h - $y3) * $this->k));
    }
    
	
	// alpha: real value from 0 (transparent) to 1 (opaque)
    // bm:    blend mode, one of the following:
    //          Normal, Multiply, Screen, Overlay, Darken, Lighten, ColorDodge, ColorBurn,
    //          HardLight, SoftLight, Difference, Exclusion, Hue, Saturation, Color, Luminosity
    function SetAlpha($alpha, $bm='Normal')
    {
        // set alpha for stroking (CA) and non-stroking (ca) operations
        $gs = $this->AddExtGState(array('ca'=>$alpha, 'CA'=>$alpha, 'BM'=>'/'.$bm));
        $this->SetExtGState($gs);
    }

    function AddExtGState($parms)
    {
        $n = count($this->extgstates)+1;
        $this->extgstates[$n]['parms'] = $parms;
        return $n;
    }

    function SetExtGState($gs)
    {
        $this->_out(sprintf('/GS%d gs', $gs));
    }

    function _enddoc()
    {
        if(!empty($this->extgstates) && $this->PDFVersion<'1.4')
            $this->PDFVersion='1.4';
        parent::_enddoc();
    }

    function _putextgstates()
    {
        for ($i = 1; $i <= count($this->extgstates); $i++)
        {
            $this->_newobj();
            $this->extgstates[$i]['n'] = $this->n;
            $this->_out('<</Type /ExtGState');
            foreach ($this->extgstates[$i]['parms'] as $k=>$v)
                $this->_out('/'.$k.' '.$v);
            $this->_out('>>');
            $this->_out('endobj');
        }
    }

    function _putresourcedict()
    {
        parent::_putresourcedict();
        $this->_out('/ExtGState <<');
        foreach($this->extgstates as $k=>$extgstate)
            $this->_out('/GS'.$k.' '.$extgstate['n'].' 0 R');
        $this->_out('>>');
    }

    function _putresources()
    {
        $this->_putextgstates();
        parent::_putresources();
    }
function Header($h,$tr)
{
    //Put watermark
    $this->SetFont('Arial','B',50);
    $this->SetTextColor(255,192,100);
	$this->SetAlpha($tr);
    $this->RotatedText(20,280,$h,45);
	$this->SetAlpha(1);
}

function RotatedText($x,$y,$txt,$angle)
{
    //Text rotated around its origin
    $this->Rotate($angle,$x,$y);
	$this->Text($x-40,$y+100,$txt);
	$this->Text($x-20,$y+50,$txt);
	$this->Text($x,$y,$txt);
	$this->Text($x-20,$y-50,$txt);
	$this->Text($x-40,$y-100,$txt);
	$this->Text($x-60,$y-150,$txt);
    $this->Rotate(0);
}

function Footer()
{
    //Go to 1.5 cm from bottom
    $this->SetY(-15);
    //Select Arial italic 8
    $this->SetFont('Arial','I',8);
    //Print centered page number
    $this->Cell(0,10,'Page '.$this->PageNo(),0,0,'C');
}

function Rotate($angle,$x=-1,$y=-1)
{
    if($x==-1)
        $x=$this->x;
    if($y==-1)
        $y=$this->y;
    if($this->angle!=0)
        $this->_out('Q');
    $this->angle=$angle;
    if($angle!=0)
    {
        $angle*=M_PI/180;
        $c=cos($angle);
        $s=sin($angle);
        $cx=$x*$this->k;
        $cy=($this->h-$y)*$this->k;
        $this->_out(sprintf('q %.5f %.5f %.5f %.5f %.2f %.2f cm 1 0 0 1 %.2f %.2f cm',$c,$s,-$s,$c,$cx,$cy,-$cx,-$cy));
    }
}

function _endpage()
{
    if($this->angle!=0)
    {
        $this->angle=0;
        $this->_out('Q');
    }
    parent::_endpage();
}


function SetWidths($w)
{
	//Set the array of column widths
	$this->widths=$w;
}

function SetAligns($a)
{
	//Set the array of column alignments
	$this->aligns=$a;
}

function Row($data,$mark='',$ang=0)
{
	//Calculate the height of the row
	$nb=0;
	for($i=0;$i<count($data);$i++)
		$nb=max($nb,$this->NbLines($this->widths[$i],$data[$i]));
	$h=6*$nb;
	//Issue a page break first if needed
	$this->CheckPageBreak($h,$mark,$ang);
	//Draw the cells of the row
	for($i=0;$i<count($data);$i++)
	{
		$w=$this->widths[$i];
		$a=isset($this->aligns[$i]) ? $this->aligns[$i] : 'L';
		//Save the current position
		$x=$this->GetX();
		$y=$this->GetY();
		//Draw the border
		$this->Rect($x,$y,$w,$h);
		//Print the text
		$this->MultiCell($w,6,$data[$i],0,$a);
		//Put the position to the right of the cell
		$this->SetXY($x+$w,$y);
	}
	//Go to the next line
	$this->Ln($h);
}

function CheckPageBreak($h,$mark='',$ang=0)
{	
	//If the height h would cause an overflow, add a new page immediately
	if($this->GetY()+$h>$this->PageBreakTrigger)
		$this->AddPage($this->CurOrientation,$mark,$ang);
}

function NbLines($w,$txt)
{
	//Determina el número de líneas de ancho '$w' que ocupará un texto '$txt'
	$cw=&$this->CurrentFont['cw'];
	if($w==0)
		$w=$this->w-$this->rMargin-$this->x;
	$wmax=($w-2*$this->cMargin)*1000/$this->FontSize;
	$s=str_replace("\r",'',$txt);
	$nb=strlen($s);
	if($nb>0 and $s[$nb-1]=="\n")
		$nb--;
	$sep=-1;
	$i=0;
	$j=0;
	$l=0;
	$nl=1;
	while($i<$nb)
	{
		$c=$s[$i];
		if($c=="\n")
		{
			$i++;
			$sep=-1;
			$j=$i;
			$l=0;
			$nl++;
			continue;
		}
		if($c==' ')
			$sep=$i;
		$l+=$cw[$c];
		if($l>$wmax)
		{
			if($sep==-1)
			{
				if($i==$j)
					$i++;
			}
			else
				$i=$sep+1;
			$sep=-1;
			$j=$i;
			$l=0;
			$nl++;
		}
		else
			$i++;
	}
	return $nl;
}
}
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="es">
	<head>
            <title>e-REdING. Biblioteca de la Escuela Superior de Ingenieros de Sevilla.</title>

                <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<meta name="description" content="Buscador de proyectos ETSI" />
<meta name="author" content="Daniel Callejo"/>
<meta name="author" content="Federico L&oacute;pez"/>
<meta name="author" content="Juli&aacute;n P&eacute;rez"/>
<meta name="author" content="Jos&eacute; Mar&iacute;a Vidal Vidal"/>
<base href="/bibing/proyectos/" /><link rel="shortcut icon" href="./favicon.ico" />
<link rel="stylesheet" href="./publico/css/estructura.css" type="text/css" />
<link rel="stylesheet" href="./publico/css/bootstrap.css" type="text/css" media="screen"/>
<link rel="stylesheet" href="./publico/css/enlaces-capas.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/pestanas.css" type="text/css"  /> 
<link rel="stylesheet" href="./publico/css/formularios.css" type="text/css" />
<link rel="stylesheet" href="./publico/css/lightbox.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/autocompleter.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/resultados.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/milista.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/explorador.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/ultimos.css" type="text/css"  />
<link rel="stylesheet" href="./publico/css/contactar.css" type="text/css"  />
<!-- <link rel="stylesheet" href="./css/print.css" type="text/css" media="print" /> -->
<script src="./publico/javascript/jquery-1.9.1.min.js" type="text/javascript"></script>
<script src="./publico/javascript/bootstrap.js" type="text/javascript"></script>

<script src="./publico/javascript/mootools-1.2.4-core.js" type="text/javascript"></script>
<script src="./publico/javascript/mootools-1-1.2.4.2-more.js" type="text/javascript"></script>
<script src="./publico/javascript/targetbl.js" type="text/javascript"></script>
<script src="./publico/javascript/mensajes.js" type="text/javascript"></script>
<script src="./publico/javascript/form.js" type="text/javascript"></script>
<script src="./publico/javascript/autocompleter/Observer.js" type="text/javascript"></script>
<script src="./publico/javascript/autocompleter/Autocompleter.js" type="text/javascript"></script>
<script src="./publico/javascript/autocompleter/Autocompleter.Request.js" type="text/javascript"></script>
<script src="./publico/javascript/domready.js" type="text/javascript"></script>

<!-- Google tag (gtag.js) -->
<script async src="https://www.googletagmanager.com/gtag/js?id=G-8T1TSNC1QY"></script>
<script>
  window.dataLayer = window.dataLayer || [];
  function gtag(){dataLayer.push(arguments);}
  gtag('js', new Date());

  gtag('config', 'G-8T1TSNC1QY');
</script>


<script type="text/javascript">
function seleccionar_todo(){
   for (i=0;i<document.formulario_marcados.elements.length;i++)
      if(document.formulario_marcados.elements[i].type == "checkbox")
         document.formulario_marcados.elements[i].checked=1
}
function deseleccionar_todo(){
   for (i=0;i<document.formulario_marcados.elements.length;i++)
      if(document.formulario_marcados.elements[i].type == "checkbox")
         document.formulario_marcados.elements[i].checked=0
} 
</script>
	</head>
    <body style="min-width: 960px; background-color: #e2e2e2; height: 100%">	
		<a name="arriba"></a>
<div>
<div id="header">
    <table id="Tabla_01" height="105" border="0" cellpadding="0" cellspacing="0">
    <tr>
        <td>
            <img src="./publico/imagenes/cabecera/banner_new2_01.jpg" width="3" height="105" alt="">
        </td>
        <td>
            <img src="./publico/imagenes/cabecera/banner_new2_02.jpg" width="100" height="105" alt="">
        </td>
        <td width="100%" align="right"  style="min-width: 613px; background-repeat: no-repeat; background-position: top right; font-size: medium; font-weight: bold; color: white;">
            <table width="100%" height="105" border="0">
                <tr>
                    <td style=" vertical-align: top; width: 547px">
                        <!-- <a style="text-decoration: none" href="./"><img src="./publico/imagenes/cabecera/banner_new2_03.jpg"alt=""></a> -->
                        <a style="text-decoration: none" href="/bibing/proyectos/"><img src="./publico/imagenes/cabecera/banner_new2_03.jpg"alt=""></a>
                     </td>
                     <td  background="./publico/imagenes/cabecera/banner_new2_04.jpg" style="background-repeat: no-repeat; background-color: #c6d4e8;"><br><br><br>
                         &nbsp;
                        </td>
                    </tr>
             </table>
        </td>
    </tr>
    <tr style="border-top: 1px solid #ffffff;">
        <td colspan="3" id="menu_sup" style="font-size: small; text-align: right; background-color: #9c1f2f; vertical-align: bottom">
             
					<a href="/bibing/proyectos/" class="enlace " style=" color: #ffffff">Inicio&nbsp;&nbsp;|</a>
					<a href="/bibing/proyectos/acerca/" style=" color: #ffffff" class="enlace ">&nbsp;&nbsp;Acerca de&nbsp;&nbsp;|</a>
					
					<a href="/bibing/proyectos/contactar/" style=" color: #ffffff" class="enlace ">&nbsp;&nbsp;Contactar&nbsp;&nbsp;</a>
			 <!--       <a href="/bibing/proyectos/ayuda/" style=" color: #ffffff" class="enlace  ">&nbsp;&nbsp;Ayuda&nbsp;&nbsp;|</a> -->
					<!-- <form id="idioma" class=""  method="post" action="">
					<div class="inline" style="color: white">
					<input type="submit" class="tipo_letra " style=" color: #ffffff"name="idioma" value="Castellanossss" />&nbsp;&nbsp;
					</div>	
					</form> -->
			        </td>

    </tr>
    </table>
</div>
<br><br>
<div class="colmask rightmenu">
<div class="panel panel-default" style="margin:20px">
            <div class="panel-heading"><h4>DISEÃ‘O DE HERRAMIENTAS PARA PORTAL DE GESTIÃ“N DE CENTROS DOCENTES</h4><h5 style="color:grey"><span class="glyphicon glyphicon-user""></span> : <b>LEIVA JIMÃ‰NEZ, ANDRÃ‰S</b><br><span class="glyphicon glyphicon-book""></span>  :<b> Ingenier&iacute;a TelecomunicaciÃ³n</b></h5></div><div class="panel-body"><div class="contenido_proyecto"><div class="titulo2_explorador">Contenido del proyecto:</div><div class="ruta"><a href="use/abreproy/11109">Directorio ra&iacute;z</a>&nbsp;&nbsp;>&nbsp;&nbsp;<a href="use/abreproy/11109/direccion/proyecto%252F">proyecto</a>&nbsp;&nbsp;>&nbsp;&nbsp;<a href="use/abreproy/11109/direccion/proyecto%252Fproyecto%252F">proyecto</a>&nbsp;&nbsp;>&nbsp;&nbsp;<a href="use/abreproy/11109/direccion/proyecto%252Fproyecto%252Fpdf%252F">pdf</a>&nbsp;&nbsp;>&nbsp;&nbsp;<a href="use/abreproy/11109/direccion/proyecto%252Fproyecto%252Fpdf%252Fmc_table.php%252F">mc_table.php</a></div><div class="listing"></div></div></div></div>
</div>
</div>

        
	</body>
 
 
<!-- Inicio Google Analytics -->
<!--
	<script type="text/javascript">
		var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
		document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
	</script>
	
	<script type="text/javascript">
		try {
		var pageTracker = _gat._getTracker("UA-7789620-1");
		pageTracker._trackPageview();
	} 
		catch(err) {}
	</script>
-->
<!-- Fin Google Analytics -->

</html>